Certain divisions of the company tend to shoot themselves in the foot by kicking off large file transfers during business hours, so I had a thought that maybe we could use time-based ACLs to do some QoSing for those guys. I fired up GNS3 with a 3600 running 12.4(25b) with some virtual PCs on it’s Ethernet interfaces.

time-range BUSINESSHOURS
 periodic daily 8:00 to 17:00
!
ip access-list extended PINGS
 permit icmp any any time-range BUSINESSHOURS
!
class-map match-all PINGS
 match access-group name PINGS
!
policy-map PM-F0/0-OUT
 class PINGS

First, I set the router’s time to outside of the time range and sent some pings over.

I’m still working on the ONT test and doing labs, so I marked up a lab for me to work.  I’m using the same setup as I did last time.  The two routers are 3640s running 12.4(25b).

Part of the lab was to identify HTTP traffic coming into F0/0 and mark it as CS3.  That’s pretty easy, right?  Of course, the lab I made up was a little more complicated, but the point comes clear with a simpler example.

I’m still studying for the ONT test, so I did some labs tonight.  One of them was to demonstrate the qos pre-classify command for tunnel interfaces.  When you have a packet sent over a GRE tunnel, the ToS field gets copied to the GRE packet, but there’s no way to see the original packet’s higher-level headers on the way out the interface.  This can be a problem if your service policy needs to see protocol, port, IPs, etc.  The fix for that is to enable qos pre-classify on the tunnel interface and cyrpto map; doing so will provide a copy of the original packet to the physical interface to classify the packet thoroughly.